Why do reactors need to use fluorescent fiber optic temperature measurement systems
When the reactor sends abnormal or faulty signals, the faulty area of the reactor heats up and the temperature rises. By monitoring the temperature, the operating status of the reactor can be determined, thereby achieving the goal of protecting the reactor. General temperature measurement devices cannot measure the internal temperature of reactors. To solve this problem, FJINNO’s fluorescent fiber optic temperature measurement system can solve it through its anti-interference and high-temperature and high-pressure resistance characteristics.
Introduction to Fiber Optic Temperature Measurement System for Reactors
The IF-DK series reactor optical fiber temperature measurement adopts a fluorescent optical fiber temperature measurement device. The sensing probe of this device is made of non-metallic material and quartz optical fiber, which has complete electrical insulation and is not affected by high voltage and strong electromagnetic fields. It is resistant to chemical corrosion and pollution, and has fast response speed, 安装简单, and high temperature resistance. The backend software is used for real-time online monitoring. The system consists of three parts: a fluorescent fiber optic 温度控制器, a fluorescent fiber optic probe, and fiber optic communication software.
基本功能 (Conventional D-type) |
1. 三绕组温度测量; 冷却风扇的自动/手动启动/停止; 每个通道的温度显示值补偿功能 2. 提供黑匣子功能, 可以记录上次停电的温度数据和历史最高温度; 3. 数字电子管显示; 4. 提供变压器门柜点开报警功能; 5. 提供 1 一组过温报警触点 (1 常开, 1 常闭); 6. 提供 1 一组过温跳闸触点 (1 常开, 1 常闭); 7. 提供 1 一套风扇远程传输触点 (1 常开, 1 常闭); 8. 提供 1 温度控制器故障报警触点集 (1 常开, 1 常闭); |
定制功能 (Customizable for special needs) |
1. 提供 1 铁芯温度测量和 2 铁芯过温报警触点 (1 常开, 1 常闭) (我功能); 2. 提供RS485通讯功能, 与时间标记通信, 能够接收时间同步, MODBUS-RTU协议 (F 函数); 3. 风扇故障诊断功能,提供风扇故障报警触点 (L 函数); 4. 提供 4 独立的4-20mA模拟电流输出功能 (E函数); 5. 提供整个机房环境的温度测量和控制; (G 函数) 6. 绕组温升率和铁芯温升率报警功能; 7. 通信协议可以采用Profibus等方法, IEC60870-5-103, 以太网通信, 等; |
On site case study of fluorescence fiber optic temperature measurement device
![]() |
![]() |