Sensor ea mocheso oa fiber optic, Mokhoa o bohlale oa ho beha leihlo, E ajoa ka moetsi oa fiber optic Chaena
The distributed fiber optic linear temperature sensing fire detector is a fiber optic fire alarm device system independently developed based on the principle of Raman scattering. This system can monitor in real time the temperature rise and fall in the area where the temperature sensing fiber is installed in the system. The distributed fiber optic temperature detection device is mainly used for temperature monitoring in a wide range of areas such as power cables, tunnel comprehensive pipe galleries, oil fields, and underground. It is particularly suitable for fire temperature sensing in areas where flammable, explosive and other hazardous materials are stored, as well as in government fire protection projects with strong electromagnetic interference, easy corrosion, high temperature, and explosion-proof coal mine requirements in the vicinity.
The distributed fiber optic temperature sensing system mainly consists of distributed fiber optic demodulators, temperature sensing fibers, etc. The function of the fiber optic demodulator is to process and upload fiber optic signals, set temperature alarms and technical requirements, etc. The function of the temperature sensing fiber is to collect the temperature of the measured object.
Distributed Fiber Optic Application Temperature Monitoring System for Oil Storage Tanks
In industrial production, the general chemical storage tanks are mainly floating roof tanks. The sealing at the top of a floating roof oil tank is not absolutely tight, and there is a possibility of a small amount of liquid and gas leakage inside the tank. Over time, in the event of natural disasters such as direct sunlight, high temperatures, and lightning, the oil tank is likely to catch fire. Due to the fact that storage tanks are usually located outdoors and have a large volume and total area, it is necessary to install a distributed fiber optic temperature measurement system on the tank.
FJINNO’s DTS distributed fiber optic temperature sensor is a newly developed linear fiber optic temperature detector. Distributed fiber optic has the advantages of intrinsic explosion-proof, strong electromagnetic interference resistance, lightning protection, high temperature measurement accuracy, light weight, and long service life. Distributed fiber optic temperature sensors are an important component of distributed temperature fire detectors. Their main feature is that they can detect temperature measurements at any point along the fiber optic line without any blind spots. Ho feta moo, fiber optic is a transmission medium and also a temperature sensor, without the need for external temperature sensors. Distributed fiber optic installation is simple, e ka tšeptjoang, and its performance is superior to traditional temperature sensing equipment, making it particularly suitable for fire temperature monitoring applications in chemical tank manufacturers.
The characteristics of DTS distributed fiber optic temperature measurement system
(1) Fiber optic cable is a temperature sensor with no fusion point in the middle, making it highly reliable. Fiber optic cable itself is a temperature sensor, playing both the role of a temperature detector and an important role in signal transmission, integrating transmission and sensing; Due to the absence of additional sensing components and the absence of fusion points in the middle of the sensing optical cable, it has high reliability.
(2) Continuous distributed measurement without measurement blind spots: DTS belongs to continuous distributed measurement and can obtain the temperature of each point along the sensing optical cable. Hajoale, the distance interval between adjacent temperature points can reach up to 0.25m, with rich temperature information and no measurement blind spots; And based on continuous temperature analysis, regional temperature difference alarm can be achieved.
(3) Low workload for later operation and maintenance: DTS’s sensing optical cables are designed based on outdoor communication optical cables, and the service life of communication optical cables can reach up to 30 years; The core components of the DTS measurement host (such as light sources, splitters, etc.) are all communication grade devices with a designed lifespan of 100000 hours (more than 10 years). The host is equipped with a temperature calibration unit and a fault self check module, ensuring stable and reliable temperature measurement.
Characteristics of Distributed Fiber Optic Temperature Sensing Fire Detectors
1. Mature system: continuous temperature measurement points, capable of linear temperature measurement and point type temperature measurement, capable of real-time online temperature detection and early warning in various different environments and temperature measurement environments; Continuous distributed power free detection technology, mature and advanced in technology.
2. Flexible alarm methods: it has multiple alarm methods such as fixed temperature, mocheso o fapaneng, and differential temperature, and can independently set multi-level alarm thresholds in different zones; Accurate fire alarm positioning and convenient system reset after the alarm situation is eliminated;
3. Safe and reliable: Temperature sensing optical fibers are inherently safe, resistant to electromagnetic interference, and particularly suitable for use in flammable, qhoma, and strong electromagnetic fields;
4. Self diagnostic function: able to make judgments and descriptions of system faults, accurately locate the fault location, and automatically reset the system after the fault is detected;
5. Real time performance: The system has real-time data collection, processing, and alarm functions to ensure the accuracy and timeliness of fire warning in the defense zone;
6. Visual display: The system is a touch screen with a graphic and text interface, which is visually displayed and has a keyboard and mouse interface to ensure a good human-computer interaction interface;
7. Advanced design: applying the latest technology and using the most advanced and reliable components; The system is highly integrated, equipped with an industrial computer and a color LCD touch screen;
8. Retrieval function: The system can save and query historical data at any time, which is beneficial for accumulating experience and providing a basis for accident trend analysis;
9. Rich interfaces: Standard device configuration RS232/485 USB、 The relay and network interface complete fire alarm and data output, and can be connected to the enterprise LAN or other network systems to achieve information sharing.
FJINNO provides fluorescent fiber optic temperature measurement systems, distributed fiber optic temperature measurement systems, fiber optic grating sensors, and fiber optic sensors as investment agents at reasonable prices. Rea u amohela ho ikopanya le rona!