Microwave electromagnetic anti-interference fiber optic temperature measurement system

Introduction to Microwave Electromagnetic Fluorescence Fiber Temperature Measurement System

Microwave belongs to ultra-high frequency electromagnetic waves, which have strong electromagnetic fields. When using conventional temperature sensors (kao što su termoparovi, thermal resistors, Itd.) za merenje temperature, metal temperature probes and wires produce induced currents under the high-frequency electromagnetic field. Due to skin effect and eddy current effect, njihova sopstvena temperatura raste, causing serious interference to temperature measurement, resulting in significant errors in temperature readings or unstable temperature measurement. Zato, the fluorescence fiber temperature measurement system independently developed by Fuzhou INNO is a non-interference temperature sensor in the microwave field. The microwave fiber optic temperature measurement system utilizes the characteristics of fiber optic fluorescence temperature measurement, which is immune to electromagnetic radiation fields, to accurately measure the temperature of the object to be heated in the microwave cavity in ultra-high frequency, strong electromagnetic field, and heavy interference environments; And accurate temperature measurement was achieved through the probe of the fluorescent temperature sensor. The fiber optic temperature measurement system is suitable for integrating single channel or multi-channel temperature measurement, and the fluorescent fiber optic temperature measurement device is particularly suitable for precise temperature measurement under environmental interference such as thermal therapy, electromagnetic, high-frequency, and microwave.

Optička sonda se sastoji od tri dela: ST konektor, optički kabl, i kraj temperature sensing kraj. ST konektor je deo povezivanja sa fotoelektričnim modulom; Optički kabl je deo prenosa, sa kvarcnim vlaknima unutra. Kvarcno vlakno ima premaz i oblogu sa spoljašnje strane, i teflonski zaštitni rukav na najudaljenijem delu; Kraj temperatura senzor kraj sadrži temperaturu senzor retkih zemnih materijala, koji se koriste za generisanje optičkih signala koji sadrže informacije o temperaturi; Optičko vlakno je otporno na visoke temperature 200 ° C i ima spoljni prečnik od 3 mm. Dugoročni radijus savijanja od 13.2cm. Kratkoročni radijus savijanja od 4.4cm. Kada je rastojanje između optičkog olova i tla je 0.4m, može da izdrži napon frekvencije snage od 100KV u trajanju od 5 Minuta.

Characteristics of Fluorescent Fiber Temperature Sensor for Microwave Electromagnetic Interference Environment

Fiber optic temperature sensors are inherently safe, resistant to strong electromagnetic interference, have good electrical insulation, stable performance, otpornost na koroziju, and long service life; High temperature measurement accuracy, wide temperature measurement range, and flexible configuration of temperature measurement channels; Easy installation, flexible networking, standardized data transmission, high cost-effectiveness, and stable quality; The preferred product for temperature monitoring of high-frequency and microwave equipment.

Fluorescent fiber optic temperature measurement belongs to the contact type temperature measurement method. This device achieves temperature measurement based on the length of fluorescence afterglow lifetime. The fluorescent substance applied to the remote temperature measuring end will emit corresponding fluorescence energy when stimulated by specific wavelengths of light. After removing the excitation of specific wavelengths of light, the fluorescence afterglow begins to decay. The duration of fluorescence afterglow depends on the temperature of the fluorescent substance located on the temperature measuring probe, To je, the temperature of the substance to be measured. The selection of specific wavelength light excitation is matched with the selected fluorescent substance, and the most effective excitation wavelength of different fluorescent substances is different. When choosing, it is important to focus on selecting the light wavelength that is most suitable for exciting fluorescent substances. The attenuation curve of fluorescent substances excited by light is usually in a single exponential form.

Practical Application Cases of Fiber Optic Temperature Measurement System in Microwave Electromagnetic Environment