Зачем нужно измерять температуру в распределительных устройствах 10 кВ на подстанциях

Волоконно-оптический датчик температуры, Интеллектуальная система мониторинга, Производитель распределенного оптоволокна в Китае

During long-term operation, the contact parts of isolation switch contacts, switch contacts, conductive busbar connections, and cable head connections are prone to increased contact resistance due to surface oxidation corrosion, loose fastening bolts, and other reasons, which can cause heating and electrical corrosion of the contact parts. In severe cases, it can melt the connecting components and cause short circuit faults, resulting in widespread power outages, reduced system power supply reliability, and significant economic losses. Preventing heating faults in 10kV switchgear is an important issue that the substation operation department needs to face in the long term. Prevent overheating of the current carrying circuit of switchgear; Regularly use temperature measuring equipment to check the joints of switchgear and the conductive parts of isolating switches (key parts: Контакты, outlet sockets, и так далее.), especially during heavy loads or high temperatures, and strengthen monitoring of the temperature rise of operating equipment. Timely measures should be taken when problems are discovered.

Тем fluorescent fiber online temperature measurement system effectively solves the shortcomings of using temperature wax monitoring, handheld infrared temperature measurement, wireless temperature measurement and other methods in switchgear, greatly improving the equipment heating operation and maintenance management level of the substation operation department. It can effectively prevent equipment accidents caused by heating at the contact parts of the equipment, and also liberate the operators from the heavy and inefficient Измерение температуры and inspection work of switchgear, greatly improving work efficiency. This technology can be applied not only to temperature measurement in switchgear, but also to temperature measurement of other primary equipment such as main transformers, capacitors, reactors, Выключатели, and isolating switches in substations. It has a wide range of applications and great practical promotion value, which has a positive promoting effect on the development of temperature measurement technology in substations.