대형 발전기를 위한 온도 측정, 고정자 권선, 및 고정자 코어

광섬유 온도 센서, 지능형 모니터링 시스템, 중국에 분포된 광섬유 제조업체

형광 광섬유 온도 측정, stator winding temperature measurement, and stator core temperature measurement for large generators

수력 발전기 고정자의 주요 가열 부분이 고정자의 내부 철심의 여러 부분에 위치하고 있기 때문입니다, when the stator voltage is too high, the iron loss increases; 또는 부하 전류가 증가함에 따라, 고정자 권선의 구리 손실이 증가합니다.; Or if the power factor decreases, the rotor’s previous current increases; Or factors such as unbalanced three-phase load current may cause an increase in stator temperature. 온도가 너무 빨리 상승하거나 경고 값에 도달했을 때, if no corresponding measures are taken immediately, 고정자 코어에 싸인 절연층의 절연 성능을 저하시키거나 절연 파괴를 일으킬 수 있습니다, 문제가 발생하기 쉽고 악성 정전으로 이어집니다.. 그러므로, real-time monitoring of the stator temperature of hydroelectric generators is essential. As the main equipment of a power plant, the health condition of the generator is of great significance for the safe, reliable, and efficient operation of the unit. In the types of faults in the generator body, overheating faults caused by overload operation, cooling system blockage, water interruption, 등. can cause a rapid increase in stator winding temperature, damage insulation parts and conductors, cause faults in the generator and its connected electrical equipment, and have an impact on the power grid. 또한, generator failures require a long maintenance cycle and extremely high maintenance costs. If not detected and dealt with early, it will bring great hidden dangers.

The stator 온도 센서 is responsible for measuring the actual temperature of the stator winding of the motor. Due to the large current flowing through the stator of the motor during operation, the heating of the stator is very severe, and the temperature rises rapidly. The sensor is arranged inside the stator winding to measure the actual temperature of the stator winding in real time. 그렇지만, once the stator overheats, the entire motor control system will be very dangerous, and the motor may be burned out and cause serious accidents. 그러므로, stator temperature sensors are very important in motor control systems. Once the stator temperature sensor malfunctions, the motor control system must take corresponding emergency measures to protect the entire motor system. With the continuous improvement of national requirements for power safety, the operating temperature of generator sets, as an important indicator of safe operation of generator sets, has become particularly important. 그중, the stator operating temperature of the generator set is the most important non electrical quantity monitoring parameter of the generator, which is directly related to the safe and stable operation of the generator set and the working life of the generator set.

In the generator stator temperature monitoring system, by simultaneously monitoring the temperature of the stator coil, 고정자 철심, and stator air outlet of the generator, it can also facilitate relevant personnel to determine the fault location of the generator, thereby improving the management efficiency of the staff. The generator stator and rotor fiber optic temperature measurement system includes a power station backend control system, unit status monitoring screen, stator system signal regulator, stator fiber optic probe, rotor system signal regulator, rotor fiber optic probe, rotor slip ring, industrial computer, relay device, communication conversion module, photoelectric conversion module, wireless transmitter, wireless receiver, wireless transmitter power supply, wireless receiver power supply, VGA transmitter, VGA receiver. The fiber optic temperature measurement system for generator stator and rotor can resist electromagnetic interference, be safe, withstand high voltage, 화학적 부식, 고온, aging, and has small size, 고감도, 빠른 응답 속도, 낮은 에너지 소비, and high accuracy. 그러므로, they are widely used in strong electric and magnetic field environments. After being applied to generator sets, it can accurately measure the real-time temperature of the stator and rotor of the generator set online, which helps to understand and evaluate the technical performance of the generator and ensure the safety of large and medium-sized generators.