Fiber optic temperature sensor, Intelligent monitoring system, Distributed fiber optic manufacturer in China
 |
 |
 |
Why does the power supply system need temperature measurement
The transmission and energy conversion of carrying electrical energy are ubiquitous throughout the entire system, process, and every link. In a stable power supply system, many of the heating is not caused by severe short-circuit currents, but by equipment and line aging, excessive resistance at circuit connection points, or prolonged operation in environments with poor heat dissipation. These hidden dangers are difficult to detect through manual inspection, so it is necessary to use temperature measurement methods to monitor key parts of the power supply system. Key components include: circuit breaker contacts, copper bars and copper bar connection points, primary cables and cable connections, transformer cores, rectifier diodes, etc. Traditional temperature measurement methods of thermal resistors and thermocouples, due to their conductor materials, can cause significant insulation hazards to the power supply system. The infrared temperature measurement method has a higher cost and is easily affected by falling dust. The wireless transmission temperature sensor is powered by a packaged battery, and its service life is only a few years. From this, it can be seen that various existing temperature measurement methods have significant limitations.
The advantages of using fiber optic sensors for temperature measurement in power supply systems
Currently, fiber optic and optoelectronic technologies are developing rapidly, and fiber optic sensor temperature measurement technology is very suitable for temperature measurement applications in power supply systems. It has advantages such as high temperature resistance, strong anti-interference ability, and accurate measurement, providing users with direct dynamic measurement. It has the advantages of direct, real-time, and accurate measurement, and is very suitable for direct temperature measurement in high voltage and strong magnetic field environments, while ensuring the insulation performance of high voltage equipment.
In the power industry, the safety of power equipment has always been of paramount importance. Due to temperature anomalies, power equipment failures occur frequently. Fiber optic temperature sensors are increasingly widely used in the power industry due to their high reliability, long lifespan, intrinsic safety, and resistance to high voltage and strong magnetic fields. The fluorescent material of the probe is one of the important factors that determine the performance of fiber optic temperature sensors, therefore, fluorescent materials suitable for use in fiber optic temperature sensors are receiving increasing attention. The power generation, transmission, transformation, distribution and other equipment in the power grid are mostly located in strong electromagnetic fields. The safe operation of key basic electrical equipment is a necessary guarantee for enterprise production and the basic guarantee for the normal operation of the entire national economy. The external thermal faults of electrical equipment are mainly caused by poor crimping of the joints. Under the action of high current, the temperature of the joints increases, and the oxidation of the contact points causes an increase in contact resistance, creating a vicious cycle of hidden dangers. This type of fault accounts for more than 90% of all thermal faults.
The power supply system of the fluorescent fiber optic temperature measurement device installs multiple fluorescent fiber optic probe temperature measurement points in key parts of the power supply system, transmits optical signals through conductive fibers, and then enters the fiber optic temperature measurement host to analyze the corresponding temperature value. The background monitoring upper computer reads the temperature data through dedicated fiber optic temperature measurement analysis software, displays and analyzes the real-time temperature values of various key parts of the power supply system, and forms a historical temperature curve through the database. Through the historical temperature data of the power supply system, big data analysis is conducted on the equipment and lines to diagnose and evaluate the operation status of the power supply system.
Online monitoring and analysis of temperature for key components of power supply equipment in the power supply system. For special high-temperature solid components of power supply equipment, precise temperature measurement is achieved through pre embedded installation, and the temperature sensor has good anti-interference effect through optical signal transmission. At the same time, the temperature sensor has high accuracy, temperature measurement range, reliability, and stability. The fluorescence fiber optic temperature measurement method has a good signal transmission topology structure. After each fiber optic temperature measurement circuit is collected through a fiber optic merging unit, the temperature data is transmitted to the fluorescence fiber optic temperature measurement host through a multi-core optical cable. After the temperature data is processed by the temperature measurement host, it is uploaded to the backend upper computer through the TCP Modbus protocol. The temperature data is displayed and analyzed through the fiber optic temperature measurement analysis software to achieve real-time alarm function. At the same time, historical data is statistically analyzed to form a historical curve, and a large amount of historical data is used to evaluate whether the load operation status of the power supply equipment is normal.
