High voltage distribution cabinet power cable insulation sleeve temperature measurement system

Sensor suhu serat optik, Sistem pemantauan cerdas, Produsèn serat optik mbagekke ing China

Temperature measurement system for high-voltage power equipment conductors

With the development of the economy and the increasing demand for quality of life, the demand for electricity is increasing, and the quality requirements for power supply provided by the power supply department are also higher. Mulane, the stable operation of the power grid for long-distance transmission lines is very important. Wire temperature is an important parameter for the operation of transmission and distribution lines. Real time monitoring of wire temperature can improve the current carrying capacity of wires, provide key data for the dynamic capacity increase of wires, and effectively improve the transmission capacity of existing transmission lines.

Temperature measurement system for high-voltage insulated conduit power cables in high-voltage distribution cabinets

The current general rural power grid comprehensive distribution cabinets are mainly used for rural and suburban agricultural distribution networks. It is difficult to solve some of the problems of low power quality in agricultural distribution networks, such as long power supply radius, high line loss rate, and large voltage drop of some distribution lines, especially in remote mountainous areas. The normal and safe operation of high-voltage electrical cabinets has become particularly important. Nanging, due to the fact that many places are far away, especially in high temperature and sun exposure in summer, and the operation of high-voltage electrical cabinets generates a large amount of heat, which was previously sealed with iron high-voltage electrical cabinets. This leads to the accumulation of a large amount of heat inside the electrical cabinets, causing different degrees of damage to internal components, and in severe cases, burning out, resulting in a large amount of heat. Affects normal use, increases maintenance difficulty, and increases operation and maintenance costs. High voltage insulation sleeve is the core component of power transmission engineering. The reliability of the operation of high voltage insulation sleeve is related to the safety of the entire DC system. If a fault occurs during operation, it can cause damage to the main body of the high voltage insulation sleeve, and in severe cases, it may cause explosion of the high voltage insulation sleeve, leading to serious burning of the transformer, and even damage to the valve hall of the converter station. Ing wektu sing padha, it can cause the DC system to lock, leading to large-scale power outages and huge economic losses. Mulane, ensuring the operational reliability of high-voltage insulation sleeves is crucial. Nanging, the temperature inside the high-voltage insulation sleeve is an important factor affecting its operational reliability. Mulane, it is necessary to monitor the temperature inside the high-voltage insulation sleeve so that on-site operators can take corresponding measures based on this temperature situation to ensure the stable operation of the high-voltage insulation sleeve.

The reliability of power supply is directly related to the safety of the operation of the rail transit system. If the power supply equipment malfunctions, it often leads to the suspension of rail transit and even safety accidents. This not only causes huge economic losses, but also may endanger the personal safety of passengers, causing extremely adverse social impacts. The rail transit line is long, there are many power supply equipment, and there are many inspection points. The traditional dedicated person on duty inspection method is difficult to meet the maintenance needs of the equipment.

The current general rural power grid comprehensive distribution cabinets are mainly used for rural and suburban agricultural distribution networks. It is difficult to solve some of the problems of low power quality in agricultural distribution networks, such as long power supply radius, high line loss rate, and large voltage drop of some distribution lines, especially in remote mountainous areas. The normal and safe operation of high-voltage electrical cabinets has become particularly important. Nanging, due to the fact that many places are far away, especially in high temperature and sun exposure in summer, and the operation of high-voltage electrical cabinets generates a large amount of heat, which was previously sealed with iron high-voltage electrical cabinets. This leads to the accumulation of a large amount of heat inside the electrical cabinets, causing different degrees of damage to internal components, and in severe cases, burning out, resulting in a large amount of heat. Affects normal use, increases maintenance difficulty, and increases operation and maintenance costs.

Ing fluorescent fiber optic temperature measurement system for high-voltage switchgear can directly, real-time, and accurately measure the hot spot temperature of internal components in the switchgear, achieving comprehensive monitoring of high-voltage equipment and a wide temperature measurement range. In addition to accurate and reliable temperature measurement performance, there are also excellent anti EMI/RFI (electromagnetic interference/radio frequency interference) ciri, high-voltage insulation, and anti-interference performance. The system consists of fluorescent optical fibers, fiber optic transmitters, temperature sensing probes, and other components. The fiber optic temperature measurement system for high-voltage equipment has the characteristics of direct, online, real-time, and accurate measurement of various high-voltage equipment hot spot temperatures, which can achieve real-time and accurate monitoring of hot spot temperatures during dynamic load operation.