سنسورهای دمای فیبر نوری INNO ,سیستم های نظارت بر دما.
Temperature monitoring system for electrical equipment
Online temperature monitoring system for high-voltage electrical equipment busbar
The temperature monitoring system of electrical equipment must have good insulation, high accuracy, fast response ability, و توانایی ضد تداخل قوی. Compared to traditional temperature measurement methods such as infrared thermometers for switchgear, the disadvantage is poor temperature stability and susceptibility to vibration and magnetic field effects.
Fluorescent fiber optic temperature sensors have obvious advantages such as resistance to electromagnetic interference, ثبات خوب, حساسیت بالا, کوچک سازی, وزن سبک, و اندازه گیری دمای تماس. fluorescent fiber optic temperature sensors for online monitoring of electrical equipment.
The necessity of installing a temperature monitoring system for high-voltage switchgear
During the long-term operation of switchgear, the high-voltage switch contacts, busbar overlap points, and other parts in the switchgear often have excessive contact resistance due to improper installation or aging, resulting in abnormal temperature in the main circuit. If this change is not known in a timely manner and continues to operate, it will further intensify heating and oxidation, and create a vicious cycle, leading to phenomena such as melting and falling off of the contact finger, burning of the contact head, and deterioration of adjacent insulation materials. Finally, it may even catch fire, causing accidents, and even serious accidents such as breakdown and explosion. For a long time, due to the high potential environment of the main circuit of high-voltage switchgear (mainly referring to the contact arms, مخاطبین, and busbars), various problems such as high-voltage insulation and electrical isolation under high and low potential cannot be solved under direct measurement conditions, making online monitoring of circuit breaker temperature a difficult problem.
Temperature measurement principle of fluorescent fiber optic switchgear
اندازه گیری دمای فیبر نوری فلورسنت متعلق به روش اندازه گیری دمای نوع تماس است. این دستگاه بر اساس طول عمر پس تاب فلورسانس به اندازه گیری دما دست می یابد. ماده فلورسنت اعمال شده به انتهای اندازه گیری دمای از راه دور هنگامی که توسط طول موج های خاص نور تحریک می شود، انرژی فلورسانس مربوطه را ساطع می کند. پس از حذف تحریک طول موج های خاص نور, پس تاب فلورسانس شروع به پوسیدگی می کند. مدت زمان پس تاب فلورسانس به دمای ماده فلورسنت واقع در پروب اندازه گیری دما بستگی دارد, که, دمای ماده ای که باید اندازه گیری شود. انتخاب تحریک نور با طول موج خاص با ماده فلورسنت انتخاب شده مطابقت دارد, و موثرترین طول موج تحریک مواد مختلف فلورسنت متفاوت است.
Characteristics of online monitoring system for temperature of high-voltage switchgear busbar
(1) The fiber optic temperature measurement device of the busbar must have strong resistance to strong electromagnetic interference inside the switchgear;
(2) The fiber optic temperature measurement system must have a sufficiently short reaction time, which determines that the hardware and software used in the system design must have a relatively fast operating speed;
(3) During the online monitoring of the switchgear, it is necessary to maintain the normal operation and performance of the switchgear.
The online monitoring system for fluorescent fiber optic temperature measurement of switchgear, the high-voltage busbar contact temperature measurement system, and the busbar contact components are equipped with temperature sensors. این سنسور دمای فیبر نوری فلورسنت is connected to the temperature controller to achieve the purpose of monitoring the temperature of the switchgear busbar.
سنسور دمای فیبر نوری, سیستم مانیتورینگ هوشمند, تولید کننده فیبر نوری توزیع شده در چین
 |
 |
 |
