INNO optika fibro-temperatursensiloj ,sistemoj de kontrolado de temperaturo.
Fibra optika temperaturo-sensilo, Inteligenta monitora sistemo, Distribuita fibro-optika fabrikisto en Ĉinio
 |
 |
 |
Why do switch cabinets need to monitor temperature
It is an important device in the power system and widely used in various industries. There are many heat dissipation components in the switchgear, and the temperature is generally high. Tamen, existing switchgear generally has poor heat dissipation and high temperature, especially in some areas or seasons with high temperatures. It is easy to cause damage to components and accidents in the switchgear due to high temperature.
With the advancement of intelligent power systems, higher requirements have been put forward for status monitoring of substation switchgear. The existing comprehensive status monitoring device for substation switchgear still faces problems of incomplete monitoring system and unstable signal transmission.
Due to the complex structure of switchgear, existing switchgear status monitoring systems mainly focus on monitoring the status of a certain aspect of the switchgear, and have not achieved multi-dimensional status monitoring of the switchgear. Due to strong electromagnetic interference inside the switchgear, the data transmission of status monitoring is easily affected, making it difficult to obtain effective monitoring data and operating status, which increases the difficulty of monitoring and maintenance of the switchgear.
Overheating faults of high-voltage switchgear have always been common in high-voltage electrical appliances, especially during high temperatures such as summer, when overheating faults occur frequently. No matter which material is used for power transmission, there is always a material resistance value present. Under the action of current and voltage, the equipment will generate normal heat loss. Tamen, when the resistance of a connector in the current circuit is too high, the gap in that part will discharge, and the amount of heat generated will increase sharply. When the normal heat dissipation of the switchgear cannot dissipate the heat quickly, the temperature of this part will rise abnormally. The occurrence of overheating faults also poses a potential threat to the personal safety of substation operation and maintenance personnel.
Tial, it is urgent to obtain the temperature field of the overheating fault of the high-voltage switchgear, so as to accurately determine its status, replace the faulty equipment in a timely manner, and avoid unnecessary losses.
Advantages of fluorescent fiber optic temperature measurement system for switchgear:
1. Multi channel temperature monitoring
Fiber optic temperature measurement can monitor the temperature of switchgear contacts, busbars, and incoming and outgoing lines, with single channel, 3, 6, kaj 9 point monitoring. More channel temperature monitoring can also be customized according to customer needs;
2. High voltage resistance and anti-interference
La Fluoreska fibro optika temperaturo mezursistemo can perform temperature monitoring, withstand high voltage, and resist electromagnetic interference;
3. Real time monitoring with long lifespan
La Fluoreska fibro optika temperaturo mezursistemo can monitor the temperature of switchgear for a long time, 24 hours without interruption, with a service life of up to 20-30 jaroj, without maintenance or calibration;
4. Multi level alarm tripping temperature control
Different temperatures can be set for alarm and trip settings to protect the normal operation of the switchgear;
5. Manufacturer produces direct after-sales service
FJINO manufacturer independently develops and produces, with strong technical strength and fast after-sales response speed.
