Why do power plants use fluorescent fiber optic sensor systems to measure temperature

Teplotní senzor s optickými vlákny, Inteligentní monitorovací systém, Výrobce distribuovaných optických vláken v Číně

Why do power plants use fiber optic temperature control systems to measure temperature

A large number of high-voltage cables and control cables are distributed in cable trenches, cable trays, and cable interlayers inside the power plant. Various cables, especially high-voltage cables, can experience temperature rise due to excessive load and aging of cable joints. Excessive temperature can easily cause fires, leading to interruptions in power plant operations. The fire caused by cables laid in a centralized manner will have a wider impact, longer repair time, and greater losses. Each power plant urgently needs an online temperature measurement technology that can automatically collect the surface temperature of cables in real time, monitor temperature changes in a timely and accurate manner, and issue warnings before the temperature becomes too high, so that managers have sufficient time to take corresponding measures and avoid fires.

To this end, Fuzhou Huaguang Tianrui Optoelectronic Technology Co., S. r. o. timely developed a linear fiber optic temperature sensing fire detection system, which can monitor the temperature of cables in real time and provide early warning and alarm. The system adopts an all fiber sensing passive temperature measurement method, eliminating the safety hazards of the monitoring system itself and greatly improving the availability of the monitoring system for power temperature monitoring. This fiber optic temperature measurement system is used by many power plants and power supply companies, greatly reducing the occurrence of fire accidents and truly achieving prevention before it occurs, in line with the safety concept of “safety first, prevention oriented” in the power industry.

Application of Fiber Optic Temperature Control System in the Power Industry

1. Temperature sensing devices are flame resistant and explosion-proof.

The temperature measurement part adopts an all fiber structure, which truly realizes passive temperature monitoring. It is not charged, does not generate heat, and will not pose any safety hazards due to the deployment of the sensing system.

2. Vysoká přesnost měření teploty a rychlá odezva.

Teplotní rozlišení hostitele měření teploty je 0.1 °C, a přesnost měření teploty je ± 1 °C. The temperature detection time for a 4Km temperature measuring optical cable is about 4 sekundy.

3. Online monitorování v reálném čase.

Monitor the temperature of all measuring points of the high-voltage cables in the power plant continuously for 7×24 hodiny, and regularly save the temperature measurement data to provide auxiliary data for the health monitoring of each high-voltage cable.

4. Distributed detection with no blind spots.

Real time monitoring can be carried out at every point within the range of temperature measuring optical cables, eliminating blind spots in monitoring and theoretically avoiding the possibility of missed fire alarms.

5. Flexible partition alarm control.

Through the monitoring software on the upper computer, Různé sekce měření teploty lze rozdělit a spravovat podle potřeb zákazníka. Obecně, every 100M optical cable is set as one partition. Nastavit různé parametry alarmu pro každý oddíl, jako je varování před teplotou, Varování před zvýšením teploty, Teplotní alarm, a alarm nárůstu teploty, pro přesné rozlišení mezi skutečnými a falešnými požáry, eliminate false alarms and omissions.

6. Comprehensive self diagnostic function.

V tomto systému, při detekci teploty každého optického kabelu pro měření teploty, Dokáže také detekovat pracovní stav každého optického kabelu pro měření teploty v reálném čase, jako jsou dodatečné ztráty způsobené poškozením nebo ohnutím kabelu, a přesně lokalizovat místo poškození nebo ohybu. Through self inspection and diagnostic functions, real-time detection of fiber optic cable damage is carried out for timely repair and maintenance.

7. Powerful software features.

Real time display of the location, temperature values, and temperature changes of each monitoring area on the human-machine interface. When an alarm occurs, it can be linked with the alarm controller to activate the ventilation and cooling device or fire extinguishing device, and the monitoring software can also trigger the sound and light alarm on the software interface. If the upper computer is equipped with a SMS alarm module, the alarm information can be sent to the designated personnel’s mobile phones to ensure timely handling of fire hazards. On the upper computer, historical temperature data and alarm records can also be queried to generate safety operation reports.