Волоконно-оптичні датчики температури INNO ,Системи контролю температури.
Волоконно-оптичний датчик температури, Інтелектуальна система моніторингу, Виробник розподіленого волоконно-оптичного волокна в Китаї
 |
 |
 |
The fiber optic grating temperature sensing fire detection system has been widely used in automatic fire detection systems, especially for narrow spaces such as tunnels and comprehensive pipe galleries. Однак, due to the continuous improvement of traditional inspection methods that only focus on the characteristics of easy construction and laying in space, the importance of temperature detection systems in monitoring has been ignored, resulting in inconvenient monitoring, high maintenance costs, and even system paralysis due to long-term disrepair, posing a fire hazard to people’s lives. To address the multiple defects caused by existing technologies, our product has made significant breakthroughs in system architecture, effectively solving the problems raised above. В даний час, China’s nuclear power plants are in a period of rapid development and construction, and the protection system of nuclear power plants using nuclear fuel reactors as energy is particularly important, among which the fire detection, alarm and linkage system is also a very important system.
Fiber Bragg Grating Temperature Measurement and Sensing Fire Alarm System
1. Being able to accurately locate the exact location of temperature changes, reflecting small temporal and spatial differences in frequency to achieve precise positioning, thus forming a precise fiber optic linear temperature detection system. It integrates computer, fiber optic communication, fiber optic sensing, fiber optic transmission, photoelectric control and other technologies. Based on the temperature measurement principle of fiber optic backscattering with temperature changes, advanced OFDR technology is adopted to monitor the feedback information on the fiber optic cable in real time, measure the temperature changes at various points on the fiber optic cable, and monitor the temperature condition of the detected area in real time;
2. Suitable for long-distance monitoring, the system is very simple and reliable, не потребує обслуговування, and easy to install. It can be suspended and laid in a straight line without affecting the installation and expansion of new equipment;
3. Long service life, inherently safe optical fiber, not affected by electromagnetic interference, comprehensive intelligent judgment without false alarms, and it is not electrified, suitable for special hazardous situations.
Fiber Bragg Grating Linear Temperature Fire Detector is a fire alarm device based on the Bragg Grating temperature sensing principle, which can detect the temperature changes along the fiber Bragg Grating sensing points in real time and achieve multi-level alarm functions; This instrument comes with a LCD screen and touch buttons, making it convenient for on-site reset and self checking operations.
The fiber optic grating linear temperature sensing fire detector processor has passed various tests and inspections in GB16280-2014 “Linear Temperature Sensing Fire Detector” and obtained the corresponding 3C certificate. The temperature sensor connected has been tested by relevant national departments and obtained a high-level explosion-proof certificate.
Characteristics of Fiber Bragg Grating Linear Thermal Fire Detector
High temperature accuracy
Synchronous scanning technology (without the need for optical switches)
Fast response speed
Wavelength division multiplexing technology can read the temperature of each monitoring point in real time
Accurate alarm positioning
Contactable linkage alarm device
Can achieve networking function
Small size, rack installation
Can be used independently as an alarm device
High reliability and stability
| Number of measurable channels | 8 |
| Maximum number of sensors per channel | 18 |
| temperature resolution | 0.1℃ |
| Temperature Accuracy | ±0.5℃ |
| Sample Rate | 1HZ |
| optical interface | FC/APC |
| Interface | RS232/RS485/RJ45 |
| Linkage interface | 32 passive contacts |
| VGA output | have |
| operation temperature | -10℃ ~50℃ |
Application of Fiber Bragg Grating Linear Thermal Fire Detector Products
Fiber Bragg Grating Linear Thermal Fire Detector is suitable for use in transportation tunnels, oil and gas pipelines, chemical, metallurgical, міць, fire protection, енергія, warehousing, military, nuclear industries and other places. It is mainly used for oil tank fire alarm.
